Dual Fuel Range Cooker With 13amp Plug
Are you a home cook who loves the flexibility of gas cooktops but requires an oven for baking? Discover a dual fuel range cooker that has the best of both worlds.
Many experienced home chefs favor gas cooktops for their superior temperature control and ability to use sophisticated cooking techniques, such as charcoaling. These stoves are costly though, especially in the event that you require an additional gas hook-up as well as an electrician to install it.
What is a 13amp plug?
If you own a dual fuel range cooker (also called a gas and electric oven) is required, you'll need an appropriately rated 13 amp plug. The plug also needs to be hard-wired into the cooker circuit using a competent electrician.
This assures that the current that flows through the plug is safe and not too high which could cause an electrical fire hazard. The current is controlled by a fuse in the plug. The fuse blows when the current flows through it beyond its capacity. This safeguards the appliance from overcharge of electricity.
The fuse is classified at 13 amps, as shown on the top of the plug. this indicates the maximum current that the plug can pass without causing damage to the appliance or overheating the socket. It is essential to ensure that when replacing fuses, you always use the same amperage as the original. If you replace the fuse using one with an alternative rating, you run the risk of overheating the socket and possibly putting you and others at high risk.
A 13 amp fuse will be a ceramic one that is extremely durable and is able to withstand extreme temperatures generated by the range cooker. Ceramic elements are also resistant to fire and thus a better choice over other kinds.
There are a few different ways that 13 amp plugs can be fitted. It could be wired to an existing live socket and the flex is connected to it by either a screw or a jaw-type cord clamp. The cord clamp should be tightened after the plug has been securely pushed into position.
Before connecting the wires, you might need to take off the wiring diagram printed on cardboard that is placed on top of the pins on some plugs. The wires must be trimmed to the proper length, because if they are too long they may be crushed when plug covers are changed. The earth wire must be the longest one to ensure that it is connected prior to the line and neutral pins.
How do I install the 13amp plug?
The majority of dual fuel range cookers sold in UK are powered by a 13 amp plug. This is vital since ovens draw large amounts of current, while the standard plug sockets have a rating of 10 amps.
Generally speaking new appliances should be equipped with a plug at the point of purchase and it is all in keeping with the Plugs and Sockets etc (Safety) Regulations 1994. However, older appliances may not have the plug, and this is where the issue arises.
The first thing to consider when connecting a cooker with an existing plug socket is to make sure that the fuse rating of the fuse box is in line with that of the plug. This is important since a fuse that is not properly sized can be dangerous.
It is also important to check that the fuse is fully seated in the cartridge and there isn't any excessive movement within it. The next step is to prepare the flex to be used. Take off the sheathing and reveal the three insulated conductors. Use a utility blade to cut the sheathing just beyond the cord grip at the point of entry into the plug. This won't penetrate the insulated conductors. This nick should be wide enough to allow the sheathing to split and enlarge the nick as it is pulled back, revealing the cable beneath. Finally cut off the excess sheathing leaving about 40mm extending beyond the flex end.
The flex is placed over the plug, with the earth terminal on the top and the live and neutral terminals on the bottom. The sheathing around each pin is removed using colored conductors as a reference. The internal cable is then fixed to the terminal with the help of the cord grip. If the plug has a screw type cord clamp loosen it, and then pull back the insulation to expose the copper conductors. Then, connect each insulated conductor to the proper terminal (starting with the earth, then neutral and finally the live) using the channel they are running through in the plug.
What is the maximum current draw of a 13amp plug?
The maximum current draw for the 13amp plug is 3kw at 230volts. This is quite a bit of power, but the standard fuse in the UK plug will not fail until the cable has reached to a risky temperature. It is important to be aware of the power you're using in your kitchen, as a defective plug or socket can lead to a fire.
The fuses in plugtops are ceramic, about 25mm long and rated for 240V mains. The fuses will have an BS Kitemark or similar mark on the side and they'll contain sand. There are also cheaper glass or plastic alternatives, but they should not be used with a live plug, except if you don't want to cause a fire and be electrocuted!
In the UK the majority of dual fuel range cookers are hardwired. They cannot be plugged directly into the wall outlet. They are usually connected to a specific cooker ring circuit, which is only suitable for appliances that draw up to 20 amps.
You can verify the ring circuit in your home by examining the fuse box or by asking an electrician nearby. Ask whether the sockets are connected to the same ring or if they are distinct. They will also be able to tell you if there is a dedicated circuit to power your oven.
If you're in the market for a brand new dual fuel range cooker, the size of your kitchen is an important aspect to take into consideration. Luckily, we have a wide range of cookers that will fit any space, including compact 50 - 60cm dual fuel models and vast 90cm + double oven models from leading brands like Rangemaster and StovesAreUs.
If you're looking for something a little more unusual Don't worry, we also have a wide selection of electric and gas multi-function cookers. These multi-functional appliances let you cook a variety of meals, like pasta, casseroles and curries.
Currys offers a wide range of Cookers. Explore our online collection or stop by our store to see the range. We provide free home installation and delivery on selected range cookers as well as flexible payment options. Our staff is ready to answer any questions you might have. Contact best value dual fuel range cooker by email or telephone. Credit is subject to status and terms and conditions apply.
What is the maximum draw of an appliance switch?
There is plenty of confusion over what the maximum current draw of a cooker switch actually is. Most cookers are hard-wired and connected to a dedicated oven-ring circuit not an ordinary socket. It is because they often consume more than 20 amps when both the electric and gas hob oven are being used.
There aren't any dual fuel range cookers that are able to be fitted in standard sockets, because this could create an extremely high risk of fire and infringe electrical regulations. An experienced electrician will install any new electrical components to the kitchen cooker and will make sure that the load (both the hob and oven) does not exceed the capacity of supply of the circuit.
Dual fuel range cookers blend the flexibility of a gas stove with the precision and precision of an electric oven. They are adored by both home cooks and chefs. Dual cookers that use fuel are great to experiment with different cooking techniques, such as searing or grilling.
When you are looking to purchase a new range cooktop, you need to be aware of a number of aspects that include size, performance and price. You will also need a gas connection in your home to connect the appliance. If you are unsure then make an appointment with a Gas Safe engineer to inspect your home prior to installation.
Currys' dual fuel range cookers are available in a range of models to suit all budgets. From affordable models by Indesit and Zanussi to our own Essentials collection. If you're looking for something more sophisticated We have a range of premium JennAir models, that come with several unique features.
It is important to read the owner's guide before purchasing a dual-fuel range cooker. This will provide specific information about the electrical and gas requirements. It is essential to make sure that your home has a gas hook-up that is suitable and you may have to have a plumber install this for you if it is required. You might also require a dedicated cooker-ring circuit, installed by a qualified electrical engineer.